Hello! I am Ou Chunhua from Huayutong Laboratory. Thank you very much for taking your precious time to visit here. Welcome to inquire at any time!

NTC is the agency that regulates wireless and telecommunications regulations in the Philippines. All wireless and telecommunications products must obtain NTC licenses before entering the market. Only locally registered companies can be NTC certificate holders.

NTC recognizes non-Type Approval and Type Acceptance as two types

1) Type Approval is for telecommunications products such as telephones, fax machines, etc.

2) Type Acceptance is for wireless products.

Basic information: NTC

Certification Type: Mandatory

Certification mark: None, only the NTC certificate number needs to be marked

Factory inspection: no

Certificate Validity: None

NTC (National Telecom mmuniction Commission of Thailand)

For telecommunication equipment, telecommunication terminal equipment, telecommunication terminal equipment and wireless products, clear specification limits have been established,

Since July 1, 2008, for telecommunications equipment and telecommunications terminal equipment, the existing

Mandatory specifications will be extended to wireless related products.

Label requirements:

Therefore, the label must be purchased from NTC, not self-printed, and the cost is one yuan in Thai baht.

Authentication mode:

Certification requires the following three modes for certification, and the classification of the product must be determined before the applicable certification mode can be determined:

A mode (Alass A Appronal)

Class A products must be tested in the laboratory of NTC*** and provide the data required by NTC to get the login number

with certificate of authentication.

Mode B: (Alass B Appronal)

The certification process is the same as the Alass A product category, except that foreign reports such as: FCC, CE, CB... can be used for transfer mode

To apply for certification, you must also obtain a login number and a certification certificate.

SDoc conforms to the declaration mode (Supplier's Declaration of Conformitf (SDoc)

This part of the product certification is a voluntary model and must be applied by the local representative of the Thai customer. After filling out the SDoc form together with the technical documents

Submit to NTC for future reference.

Applying for certification requires a local representative and the local representative must have a supplier code (Suppliers code),

And apply in Thai. Basically, the certification time is 4-5 weeks, and the sample requirements are in CLASS A

Part of the requirements, in the CLASS A part, it must be provided when there is sometimes a compliance review requirement, and the SDOC mode is not required

Among them, products for WIFI are classified in SDOC. Although NTC announced 2.4GHZ in 2003

Products whose output power is below 100W can be exempted from formal approval. However, this regulation will be implemented in 2008

It was changed after July of 2009. WIFI products will only be released after confirming that their products meet the technical requirements of NTC.

Can be imported into Thailand. The declaration letter and relevant compliance documents shall be attached by Xu Jian when the manufacturer clears the customs.

深圳市华宇通检测技术有限公司

Contact phone number for NTC certification agency in the Philippines for network player